Custom Logo Tool Free Bicycle Cup Holder Vendor
Custom Logo Tool Free Bicycle Cup Holder Vendor
This cup holder attaches to bicycle handlebars or frame tubes without requiring tools, using a spring‑loaded clamp that grips diameters from 22 mm to 32 mm. The design incorporates a removable insert
- Categories:Bicycle Cup Holder
Custom Logo Tool-Free Bicycle Cup Holder
Product Overview
This cup holder attaches to bicycle handlebars or frame tubes without requiring tools, using a spring‑loaded clamp that grips diameters from 22 mm to 32 mm. The design incorporates a removable insert that can be laser‑etched or pad‑printed with a customer logo, allowing brand exposure while the rider is in motion.
Key Functional Characteristics
The clamping mechanism exerts a consistent normal force of approximately 15 N, sufficient to prevent slippage under typical road vibrations up to 5 g. A polymer liner with a Shore A hardness of 70 protects the bike’s finish while maintaining friction.
The holder body is molded from UV‑stabilized polypropylene, retaining impact strength after 500 hours of accelerated weathering. The logo insert sits in a recessed pocket, shielded from direct contact with liquids or debris.
Typical Applications
- Commuter bicycles where riders need quick access to hydration bottles.
- Delivery e‑bikes used for urban logistics, enabling hands‑free drinking.
- Fleet‑managed shared bikes where branding is required for sponsorship visibility.
- Recreational mountain bikes where a tool‑free solution reduces setup time at trailheads.
Technical Specification Table
| Parameter | Typical Value | Notes |
|---|---|---|
| Clamp Diameter Range | 22 mm – 32 mm | Fits most handlebar and frame tube sizes |
| Maximum Load (static) | 1.5 kg | Sufficient for standard 500 ml bottles |
| Operating Temperature | ‑20 °C to +80 °C | UV‑stabilized PP retains properties |
| Logo Insert Area | 30 mm × 15 mm | Laser etch or pad print, depth ≤0.2 mm |
Customization Options
Logo placement is limited to the insert pocket; customers may supply vector artwork (AI, EPS, SVG) or high‑resolution raster files (≥300 dpi). Two‑color pad printing is available for Pantone‑matched hues, while single‑color laser etching provides a permanent, abrasion‑resistant mark.
Alternative body colors (black, white, gray, or custom Pantone) can be requested by adding a masterbatch during injection molding, with minimum order quantities typically starting at 500 units.
Quality Assurance Approach
Each production lot undergoes dimensional inspection on a CMM, checking clamp inner diameter and insert pocket depth to ±0.1 mm tolerance. A random sample of 5 % is subjected to a 10‑cycle fatigue test simulating 10 km of road vibration.
Logo adhesion is verified via cross‑hatch tape test (ASTM D3359) requiring a rating of 4B or better after 24 hours.
Packaging and Shipping
Units are packed in recyclable corrugated trays, 50 pieces per tray, with each tray sealed in a polyethylene bag to prevent moisture ingress. Trays are stacked on pallets and stretch‑wrapped for export.
Frequently Asked Questions
- Can the clamp size be adjusted for non‑standard tubing? – Yes, custom mold inserts can produce diameters from 18 mm to 38 mm; tooling costs apply.
- What file formats are acceptable for logo artwork? – AI, EPS, SVG for vector; PNG or TIFF at ≥300 dpi for raster.
- How are samples arranged? – A pre‑production sample with blank insert is shipped within 7 working days after artwork approval; a second sample with logo follows after 5 days.
- What is the typical lead time for an order of 2 000 units? – Four weeks for standard colors, six weeks for custom Pantone body colors.
This cup holder attaches to bicycle handlebars or frame tubes without requiring tools, using a spring‑loaded clamp that grips diameters from 22 mm to 32 mm. The design incorporates a removable insert
Send Inquiry
If you are interested in our products, leave your information here and we will be in touch shortly.